For Pilz PSENopt II Series 30 mm Resolution 18 m Sensing Distance 150 mm to 1350 mm Protective Height Basic Type 3 Light Curtain with Hand Protection Replacement
- Model
- PSENopt II Series | PSEN opII3H-s-30-015, PSEN opII3H-s-30-030, PSEN opII3H-s-30-045, PSEN opII3H-s-30-060, PSEN opII3H-s-30-075, PSEN opII3H-s-30-090, PSEN opII3H-s-30-105, PSEN opII3H-s-30-120, PSEN opII3H-s-30-135
Item specifics
- Series:
- PSENopt II Series
- Resolution:
- 30 mm
- Scanning range:
- 0.2 - 18 m
- Protective field height:
- 150 - 1350 mm
- 2 Safety outputs (OSSD):
- 2 PNP
- Response time:
- 5.2 - 10.4 ms
- Connection type:
- M12
- security level:
- PLd3
Review
Description
For Pilz PSENopt II Series 30 mm Resolution 18 m Sensing Distance 150 mm to 1350 mm Protective Height Basic Type 3 Light Curtain with Hand Protection Replacement Parameter
Brand | From network | DADISICK |
|
|
Models
|
PSEN opII3H-s-30-015 | QT08-20-140 2BE |
|
PSEN opII3H-s-30-030 |
QT16-20-300 2BE | ||
PSEN opII3H-s-30-045 | QT24-20-460 2BE |
||
PSEN opII3H-s-30-060 | QT32-20-620 2BE | ||
PSEN opII3H-s-30-075 | QT38-20-740 2BE | ||
PSEN opII3H-s-30-090 | QT46-20-900 2BE | ||
PSEN opII3H-s-30-105 | QT54-20-1060 2BE | ||
PSEN opII3H-s-30-120 | QT62-20-1220 2BE | ||
PSEN opII3H-s-30-135 | QT68-20-1340 2BE | ||
Beam spacing | 30 mm | 20 mm | |
Protected altitude | 150 mm, 300 mm, 450 mm, 600 mm, 750 mm, 900 mm, 1050 mm, 1200 mm, 1350 mm | 140 mm, 300 mm,460 mm, 620 mm, 740 mm, 900 mm, 1060 mm, 1220 mm, 1340 mm | |
Scanning range | 0.2 - 18 m | 0.3 - 20 m | |
Response time | 5.2 ms - 10.4 ms | ≤15 ms | |
Output method | 2 PNP | 2 PNP | |
Reliability and durability | IP65 | IP65 | |
Connector | M12 | M16 | |
Housing cross-section | 40 mm x 35 mm | 51 mm x 35 mm | |
Safety Certificate | CE, UKCA, cULus Listed, KCs, TÜV, EAC | TÜV, UL, CE, RoHS, GB | |
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | |||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand Pilz's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
Model：
QT08-20-140 2BE, QT16-20-300 2BE, QT24-20-460 2BE
QT32-20-620 2BE, QT38-20-740 2BE, QT46-20-900 2BE
QT54-20-1060 2BE, QT62-20-1220 2BE, QT68-20-1340 2BE
FAQ
Q: What is an infrared high-precision measurement and detection light curtain?
A：
With the rapid development of industry, the operation and control technology of machines are becoming more advanced, and automated equipment has become an essential tool in modern factories. However, if safety precautions are not properly implemented, there could be potential safety hazards in hazardous work areas such as punching machines, hydraulic presses, oil presses, intelligent warehousing, and industrial robots. The application of infrared light grid sensors in the field of safety protection is known as safety light curtains/safety light screens/optical protective devices, etc.
As the precision requirements for workpieces increase and labor costs become more expensive, along with the widespread use of automated equipment, many industries choose to use automated or semi-automated solutions to overcome tedious and repetitive manual measurements. These solutions are commonly used for measuring the shape, size, volume contour of objects, hole detection, classification detection, positioning detection, edge detection, height limitation detection, vehicle separation, and other aspects.
DADISICK's measurement light curtains are derived from safety light curtains and have higher accuracy and technical requirements. Their principle is based on detecting changes in the shape of objects passing through the infrared light curtain by sensing whether the infrared light is obstructed and the number of obstructing blocks.
Safety light curtains are commonly used for safety protection and detection positioning. Typically, safety light curtains are used as switch signals, with normally closed mode used for personal safety protection and normally open mode used for detecting the position of workpiece products
DADISICK's QL measurement light curtains usually communicate with safety light curtains using RS485/RS232/analog current/analog voltage. Of course, we also support network port output. The purpose is to transmit the signals detected by the measurement light curtains through communication to the PLC or controller to obtain the required data.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
