For BALLUFF S-BUS Series M30 Ultrasonic Sensors with Analog Output or Digital Output Replacement | Sensing Range 600 mm to 8000 mm
- Model
- S-BUS Series | BUS003Y(BUS M30E1-PPC-60/600-S92K), BUS0054(BUS M30M1-NPX-60/600-S92K), BUS003Z(BUS M30M1-PWX-60/600-S92K), BUS0041(BUS M30M1-XC-60/600-S92K)
Item specifics
- Series:
- S-BUS Series
- Size:
- M30
- Sensing Distance:
- 600...8000 mm
- Output Method:
- PNP / NPN / Analog / Digital output
- Connection Type:
- M12
- Security level:
- IP67
- Material:
- Brass / Stainless steel
Review
Description
For BALLUFF S-BUS Series M30 Ultrasonic Sensors with Analog Output or Digital Output Replacement Parameter
Brand | From network | DADISICK |
|||
Models | BUS003Y(BUS M30E1-PPC-60/600-S92K) | CSB30-6000-J70-IUEP-IO-V15 | |||
BUS0054(BUS M30M1-NPX-60/600-S92K) | CSB30-6000-J70-E2-V15CSB30-6000-J70-E4-V15 | ||||
BUS003Z(BUS M30M1-PWX-60/600-S92K) | CSB30-6000-J70-E6-V15CSB30-6000-J70-E8-V15 | ||||
BUS0041(BUS M30M1-XC-60/600-S92K) | CSB30-6000-J70-IU-V15 | ||||
Thread Size | M30 | M30 | |||
Sensing Distance | 600...8000 mm | 350 mm - 6000 mm | |||
Output Method | NPN NO/NC
2*PNP NO/NC
PNP NO/NC
Analog voltage 0-10 V
Analog current 4-20 mA | NPN NO/NC
2*PNP NO/NC
Analog voltage 0-10 V
Analog current 4-20 mA
Analog + push pull output, support IO-Link | |||
Connector | M12 | M12 | |||
Security level | IP67 | IP67 | |||
Material | Brass / Stainless steel | Nickel plated copper | |||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | |||||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand BALLUFF's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
Model:
CSB30-6000-J70-IUEP-IO-V15, CSB30-6000-J70-E2-V15,
CSB30-6000-J70-E4-V15, CSB30-6000-J70-E6-V15,
CSB30-6000-J70-E8-V15, CSB30-6000-J70-IU-V15
FAQ
Please describe the maintenance procedures for ultrasonic sensors.
A: It is important to regularly check the cleanliness of the transducer to avoid dust and dirt from affecting the transmitting and receiving functions of the transducer. It is important to calibrate the sensor on a regular basis to ensure that the measurements are accurate. Following the maintenance guide provided by the manufacturer will ensure the sensor's optimal performance and longevity.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
