For BALLUFF S-BUS Series M18 Ultrasonic Sensors with Analog Output or Digital Output Replacement | Sensing Range 65 mm to 600 mm
- Model
- S-BUS Series | BUS007H(BUS M18M1-GPXI-07/035-S92G-511), BUS004T(BUS M18M1-XA-07/035-S92G), BUS004W(BUS M18M1-XB-07/035-S92G)
Item specifics
- Series:
- S-BUS Series
- Size:
- M18
- Sensing Distance:
- 65...600 mm
- Output Method:
- PNP / NPN / Analog / Digital output
- Connection Type:
- M12x1-Male, 5-pin
- Security level:
- IP67
- Material:
- Nickel-plated brass
Review
Description
For BALLUFF S-BUS Series M18 Ultrasonic Sensors with Analog Output or Digital Output Replacement Parameter
Brand | From network | DADISICK |
|||
Models | BUS007H(BUS M18M1-GPXI-07/035-S92G-511) | CSB18-1000-J55-2EP-IO-V15 | |||
BUS004T(BUS M18M1-XA-07/035-S92G) | CSB18-1000-J55-U-V15 | ||||
BUS004W(BUS M18M1-XB-07/035-S92G) | CSB18-1000-J55-I-V15 | ||||
Thread Size | M18 | M18 | |||
Sensing Distance | 65...600 mm | 60 mm - 1000 mm | |||
Output Method | Analog voltage 0-10 V
Analog current 4-20 mA IO-Link PNP/NPN NO/NC push-pull | Analog voltage 0-10 V
Analog current 4-20 mA 2 push pulls, support IO-Link output | |||
Connector | M12x1-Male, 5-pin | M12 | |||
Security level | IP67 | IP67 | |||
Material | Nickel-plated brass | Nickel plated copper | |||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | |||||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand BALLUFF's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
FAQ
Please describe the installation requirements for ultrasonic sensors.
A: Ultrasonic sensors should be installed in a location that avoids obstructions and reflective surfaces, keeps the transmitting and receiving areas of the sensor clean, and follows the manufacturer's installation guidelines to ensure optimal performance.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
