For BALLUFF S-BUS Series M12 Ultrasonic Sensors with Analog Output Replacement | Sensing Range 20 mm to 250 mm and 40 mm to 350 mm
- Model
- S-BUS Series | BUS0067(BUS M12M1-XA-02/015-S04G), BUS0069(BUS M12M1-XB-02/015-S04G), BUS0068(BUS M12M1-XA-05/024-S04G), BUS006A(BUS M12M1-XB-05/024-S04G)
Item specifics
- Series:
- S-BUS Series
- Size:
- M12
- Sensing Distance:
- 20...250 mm / 40...350 mm
- Output Method:
- Analog output
- Connection Type:
- M12x1-Male, 4-pin
- Security level:
- IP67
- Material:
- Nickel-plated brass
Review
Description
For BALLUFF S-BUS Series M12 Ultrasonic Sensors with Analog Output Replacement Parameter
Brand | From network | DADISICK |
|||
Models | BUS0067(BUS M12M1-XA-02/015-S04G) | CSB12-200-J55-U-V1 | |||
BUS0069(BUS M12M1-XB-02/015-S04G) | CSB12-200-J65-I-V1 | ||||
BUS0068(BUS M12M1-XA-05/024-S04G) | CSB12-200-J55-U-V1 | ||||
BUS006A(BUS M12M1-XB-05/024-S04G) | CSB12-200-J65-I-V1 | ||||
Thread Size | M12 | M12 | |||
Sensing Distance | 20...250 mm / 40...350 mm | 20 mm - 200 mm | |||
Output Method | Analog voltage 0-10 V
Analog current 4-20 mA | Analog voltage 0-10 V
Analog current 4-20 mA | |||
Connector | M12x1-Male, 4-pin | M12 | |||
Security level | IP67 | IP67 | |||
Material | Nickel-plated brass | Nickel plated copper | |||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | |||||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand BALLUFF's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
Model:
CSB12-200-J55-U-V1, CSB12-200-J65-1-V1,
CSB12-200-J55-U-V1, CSB12-200-J65-1-V1
FAQ
Please define the term "ultrasonic sensor."
An ultrasonic sensor is a sensor that uses ultrasonic waves to measure distance, speed, and other physical quantities. The device makes measurements by emitting ultrasonic waves and receiving the waves reflected back from them.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
