For Pilz PSENopt II Series 30 mm Resolution 18 m Sensing Distance 1500 mm to 1800 mm Protective Height Basic Type 3 Light Curtain with Hand Protection Replacement
- Model
- PSENopt II Series | PSEN opII3H-s-30-150, PSEN opII3H-s-30-165, PSEN opII3H-s-30-180
Item specifics
- Series:
- PSENopt II Series
- Resolution:
- 30 mm
- Scanning range:
- 0.2 - 18 m
- Protective field height:
- 1500 - 1800 mm
- 2 Safety outputs (OSSD):
- 2 PNP
- Response time:
- 11 - 12.3 ms
- Connection type:
- M12
- security level:
- PLd3
Review
Description
For Pilz PSENopt II Series 30 mm Resolution 18 m Sensing Distance 1500 mm to 1800 mm Protective Height Basic Type 3 Light Curtain with Hand Protection Replacement Parameter
Brand | From network | DADISICK |
|
Models
|
PSEN opII3H-s-30-150 | QMT76-20-1500 2BE |
|
PSEN opII3H-s-30-165 |
QMT84-20-1660 2BE | ||
PSEN opII3H-s-30-180 | QMT92-20-1820 2BE |
||
Beam spacing | 30 mm | 20 mm | |
Protected altitude | 1500 mm, 1650 mm, 1800 mm | 1500 mm, 1660 mm, 1820 mm | |
Scanning range | 0.2 - 18 m | 0.3 - 20 m | |
Response time | 11 ms - 12.3 ms | ≤15 ms | |
Output method | 2 PNP | 2 PNP | |
Reliability and durability | IP65 | IP65 | |
Connector | M12 | M16 | |
Housing cross-section | 40 mm x 35 mm | 51 mm x 35 mm | |
Safety Certificate | CE, UKCA, cULus Listed, KCs, TÜV, EAC | TÜV, UL, CE, RoHS, GB | |
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. |
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand Pilz's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
FAQ
Q: How to determine if a safety light curtain is working properly?
A:
Safety light curtains are also known as safety light screens, safety light curtain sensors, infrared safety light curtains, photoelectric protectors, infrared photoelectric protectors, punch press photoelectric protection devices, etc.
How to determine if a safety light curtain is in working mode?
Many customers may have doubts when using a light curtain for the first time, wondering if it is installed correctly and if it is in normal working mode.
Because the purpose of a safety light curtain is to protect personal safety, it must be taken seriously. So how can we determine if a safety light curtain is in working mode?
When the safety light curtain is powered on, the emitter will flash three times and then remain on, indicating that it has entered the working mode. The receiver will have red and green lights flashing three times when powered on, indicating that it has also entered the working mode.
What are the conditions for the safety light curtain to be working properly?
When the emitter and receiver are in working condition, the emitter's red light remains on, and the receiver's green light is illuminated. When the light curtain is obstructed, there is no change in the emitter's indicator light, but the receiver's light changes from green to red, and the digital display shows the number of blocked light beams. When there is no obstruction, the receiver returns to its normal state with a constant green light.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.