For Safetytec Red4 Series 114 mm Resolution 5 m Sensing Distance 223 mm to 2393 mm Protective Height Safety Lightguard Replacement
- Model
- Red4 Series | RED4/114-PH223/L, RED4/114-PH657/L, RED4/114-PH1091/L, RED4/114-PH1525/L, RED4/114-PH1959/L, RED4/114-PH2393/L
Item specifics
- Series:
- RED4 Series
- Resolution:
- 114 mm
- Scanning range:
- 0 - 5 m
- Protective field height:
- 223 mm - 2393 mm
- 2 Safety outputs (OSSD):
- 2 NPN
- Response time:
- 10 - 40 ms
- Connection type:
- M12
- security level:
- PLe4
Review
Description
For Safetytec Red4 Series 114 mm Resolution 5 m Sensing Distance 223 mm to 2393 mm Protective Height Safety Lightguard Replacement Parameter
Brand | From network | DADISICK |
|
Models
|
RED4/114-PH223/L | QM04-80-240 2AB |
|
RED4/114-PH657/L |
QM10-80-720 2AB | ||
RED4/114-PH1091/L | QM14-80-1040 2AB |
||
RED4/114-PH1525/L | QM20-80-1520 2AB | ||
RED4/114-PH1959/L | QM26-80-2000 2AB | ||
RED4/114-PH2393/L | QM30-80-2320 2AB | ||
Beam spacing | 114 mm | 80 mm | |
Protected altitude | 223 mm, 657 mm, 1091 mm, 1525 mm, 1959 mm, 2393 mm | 240 mm, 720 mm, 1040 mm, 1520 mm, 2000 mm, 2320 mm | |
Scanning range | 0 - 5 m | 0.3 - 6 m | |
Response time | 10 - 40 ms | ≤15 ms | |
Output method | 2 NPN | 2 NPN | |
Reliability and durability | IP65 | IP65 | |
Connector | M12 | M12 | |
Housing cross-section | 41 mm x 46 mm | 36 mm x 36 mm | |
Safety Certificate | CE, UKCA | TÜV, UL, CE, RoHS, GB | |
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. |
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand Safetytec's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
Model:
QM04-80-240 2AB, QM10-80-720 2AB, QM14-80-1040 2AB
QM20-80-1520 2AB, QM26-80-2000 2AB, QM30-80-2320 2AB
FAQ
Q: What tests should we perform after installing a new light curtain?
A:
We recommend functional testing and safety verification to ensure the new light curtain will work properly. Test items include detection range, response time and alarm function.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.