For PEPPERL+FUCHS SLCT60/35 Series 60 mm Resolution 20 m Sensing Distance 300 mm to 2400 mm Protective Height Base Light Curtain Replacement
- Model
- SLCT60/35 Series | SLCT60-0300-R/35, SLCT60-0300-T/35, SLCT60-0600-R/35, SLCT60-0600-T/35, SLCT60-0900-R/35, SLCT60-0900-T/35, SLCT60-1200-R/35, SLCT60-1200-T/35, SLCT60-1500-R/35, SLCT60-1500-T/35, SLCT60-1800-R/35, SLCT60-1800-T/35, SLCT60-2100-R/35, SLCT60-2100-T/35, SLCT60-2400-R/35, SLCT60-2400-T/35
Item specifics
- Series:
- SLCT60/35 Series
- Resolution:
- 60 mm
- Scanning range:
- 5 - 20 m
- Protective field height:
- 300 - 2400 mm
- 2 Safety outputs (OSSD):
- 2 PNP
- Response time:
- 9 - 23 ms
- Connection type:
- M12
- security level:
- PLc2
Review
Description
For PEPPERL+FUCHS SLCT60/35 Series 60 mm Resolution 20 m Sensing Distance 300 mm to 2400 mm Protective Height Base Light Curtain Replacement Parameter
Brand | Receiver | Transmitter | DADISICK |
|
|
Models
|
SLCT60-0300-R/35 | SLCT60-0300-T/35 | QT08-40-280 2BE |
|
SLCT60-0600-R/35 | SLCT60-0600-T/35 |
QT16-40-600 2BE | ||
SLCT60-0900-R/35 | SLCT60-0900-T/35 | QT24-40-920 2BE |
||
SLCT60-1200-R/35 | SLCT60-1200-T/35 | QT30-40-1160 2BE | ||
SLCT60-1500-R/35 | SLCT60-1500-T/35 | QT38-40-1480 2BE | ||
SLCT60-1800-R/35 | SLCT60-1800-T/35 | QT46-40-1800 2BE | ||
SLCT60-2100-R/35 | SLCT60-2100-T/35 | QT54-40-2120 2BE | ||
SLCT60-2400-R/35 | SLCT60-2400-T/35 | QT60-40-2360 2BE | ||
Beam spacing | 60 mm | 40 mm | ||
Protected altitude | 300 mm, 600 mm, 900 mm, 1200 mm, 1500 mm, 1800 mm, 2100 mm, 2400 mm | 280 mm, 600 mm, 920 mm, 1160 mm, 1480 mm, 1800 mm, 2120 mm, 2360 mm | ||
Scanning range | 5 - 20 m | 0.3 - 20 m | ||
Response time | 9 ms - 23 ms | ≤15 ms | ||
Output method | 2 PNP | 2 PNP | ||
Reliability and durability | IP67 | IP65 | ||
Connector | M12 | M16 | ||
Housing cross-section | 20 mm x 29.5 mm | 51 mm x 35 mm | ||
Safety Certificate | TÜV, UL, EC, UKCA | TÜV, UL, CE, RoHS, GB | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | ||||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand PEPPERL+FUCHS's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
Model：
QT08-40-280 2BE, QT16-40-600 2BE, QT24-40-920 2BE
QT30-40-1160 2BE, QT38-40-1480 2BE, QT46-40-1800 2BE
QT54-40-2120 2BE, QT60-40-2360 2BE
FAQ
Q: How to choose the output mode of a safety light curtain?
A：
The output mode of a safety light curtain refers to the form in which the safety light curtain converts the signal. There are typically multiple options available, and users can choose based on their specific needs. Here are some common output modes for safety light curtains.
Relay output. This is the most common output mode, where the safety light curtain has a built-in small relay with a set of normally open and normally closed passive output contacts that can be connected to any load.
1. NPN/PNP output: This output mode is commonly used for connecting to digital circuit controllers, where the signal is output in a pulsed manner. Users can select one of the output modes based on their specific needs, and it can be connected to PLCs, PCs, or external relays.
2. Dual NPN output/Dual PNP output: This output mode allows for two load connections, such as PLCs, PCs, or external relays, or can be connected to a safety relay output. It is suitable for various application scenarios.
3. Controller output: The controller can provide the necessary supply for the safety light curtain, and the safety light curtain can direct
to choose the appropriate output mode for a safety light curtain, it is important to consider the specific requirements of different application scenarios. DADISHENG safety light curtains remind you that for situations requiring long-distance signal transmission or remote control, relay output is recommended. For industrial automation applications, NPN/PNP output or controller output can be selected.
Furthermore, users should also consider factors such as safety, stability, and user-friendliness. Regardless of the chosen output, it is crucial to ensure reliability and stability to guarantee the normal operation and safety of the system.
In summary, there are several options for the output mode of a safety light curtain, including relay output, NPN/PNP output, dual NPN output, dual PNP output, and controller output. When selecting the output mode, users should consider the requirements of their specific application scenario and take into account factors such as safety, stability, and user-friendliness.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
