For Banner SGS Series 400mm Resolution 800mm Protective Height Light Curtain Safety Device Replacement
- Model
- SGS Series | SGSXP3-400Q88, SGSSP3-400Q88, SGSB3-400, SGSMP3-400Q128, SGSSA3-400Q8, SGSMA3-400Q12
Item specifics
- Series:
- SGS Series
- Resolution:
- 400mm
- Scanning range:
- 6-60m/0.5-8m/0.5-30m
- Protective field height:
- 800mm
- 2 Safety outputs (OSSD):
- 2 PNP
- Response time:
- 12-13ms
- Connection type:
- M12
- Security level:
- UL, CE, PLe4
Review
Description
For Banner SGS Series 400mm Resolution 800mm Protective Height Light Curtain Safety Device Replacement Parameter
Brand | From network | DADISICK |
|
Models | SGSXP3-400Q88 | ||
SGSSP3-400Q88 | |||
SGSMP3-400Q128 | |||
SGSB3-400 | |||
SGSSA3-400Q8 | |||
SGSMA3-400Q12 | |||
Beam spacing | 400mm | 200mm | |
Protected altitude | 800mm | 600mm | |
Scanning range | 6-60m/0.5-8m/0.5-30m | 0.3-10m/0.3-30m/0.3-45m | |
Response time | 12-13ms | ≤15ms | |
Output method | 2 PNP | 2 PNP | |
Reliability and durability | IP65 | IP65 | |
Connector | M12 | M16 | |
Housing cross-section | 52 x 56.9mm | 51 x 35mm | |
Safety Certificate | UL, CE, PLe4 | TUV, UL, CE, RoSH, GB | |
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | |||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand Banner's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
FAQ
1. When replacing a safety light curtain, how should I determine which model is most suitable for my application scenario?
To select the most suitable replacement light curtain, please determine the specifications and features of your existing light curtain. It is important to consider the detection range, resolution, response time, and safety rating of the replacement light curtain. Once you have gathered this information, you can use it to compare with our catalog to ensure that the new model will meet or exceed the performance of the existing light curtain.
2. Please provide details of the standards to which your safety light curtains are certified.
Our light curtain products have undergone rigorous testing and comply with the relevant safety standards of many countries and regions, including China GB/T 19001-2016, ISO 9001:2015, IEC61496-1/2 standardized safety ratings, EU CE certification, and South German TÜV certification.
3. Please confirm whether the new light curtain is compatible with the existing system.
We can provide a customized 1:1 replacement of the original light curtain data connector. Compatibility is guaranteed for electrical interfaces, communication protocols, and mechanical mounting. Please review the specifications to determine if your existing light curtain is compatible with ours. If you have any questions, please contact our technical support team.
4. Please advise as to the tests that should be performed after the installation of a new light curtain.
It is recommended that functional tests and safety verifications be performed to ensure that the new light curtain is working properly. Tests should be conducted to verify the detection range, response time, and alarm function.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
