For Autonics SFL Series Safety Light Curtain Standard Type Replacement 25 mm Resolution Hand-body Protection | 15 m Operating Range | 1043 mm to 1868 mm Protective Height
- Model
- SFL Series | SFL30-42, SFL30-45, SFL30-48, SFL30-51, SFL30-54, SFL30-57, SFL30-60, SFL30-63, SFL30-66, SFL30-69, SFL30-72, SFL30-75
Item specifics
- Series:
- SFL Series
- Resolution:
- 25 mm
- Scanning range:
- 0.2 m - 15 m
- Protective field height:
- 1043 mm - 1868 mm
- 2 Safety outputs (OSSD):
- 2 PNP
- Response time:
- 19.9 ms
- Connection type:
- M12
- Security level:
- PLe4
Review
Description
For Autonics SFL Series Safety Light Curtain Standard Type Replacement Parameter
Brand | From network | DADISICK |
|
|
Models
|
SFL30-42 | ||
SFL30-45 |
|||
SFL30-48 |
|||
SFL30-51 | |||
SFL30-54 | |||
SFL30-57 | |||
SFL30-60 | |||
SFL30-63 | |||
SFL30-66 | |||
SFL30-69 | |||
SFL30-72 | |||
SFL30-75 | |||
Beam spacing | 25 mm | 20 mm | |
Protected altitude | 1043 mm, 1118 mm, 1193 mm, 1268 mm, 1343 mm, 1418 mm, 1493 mm, 1568 mm, 1643 mm, 1718 mm, 1793 mm, 1868 mm | 1060 mm | |
Scanning range | 0.2 m - 15 m | 0.3 m - 15 m | |
Response time | 19.9 ms | ≤15 ms | |
Output method | 2 PNP | 2 PNP | |
Reliability and durability | IP65 / IP67 / IP67G / IP69K | IP65 | |
Connector | M12 | M12 | |
Housing cross-section | 29 mm × 35 mm | 36 mm × 36 mm | |
Safety Certificate | TÜV, UL, CE, UKCA, RoHS, S-Mark, KCs | TÜV, UL, CE, RoHS, GB | |
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | |||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand Autonics's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
FAQ
If the safety light curtain's grid does not respond or has a delayed response, follow these steps:
1.Check the power supply connection and the wiring between the light curtain and the controller.
2.It may be necessary to recalibrate the light curtain.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
