For KEYENCE GL-S Series Safety Light Curtain Flat Type Replacement 20 mm Resolution | 2 m Operating Range | 140 mm to 780 mm Protective Height
- Model
- GL-S Series | GL-S08FH, GL-S12FH, GL-S16FH, GL-S20FH, GL-S24FH, GL-S28FH, GL-S32FH, GL-S36FH, GL-S40FH
Item specifics
- Series:
- GL-S Series
- Resolution:
- 20 mm
- Scanning range:
- 0.1 m - 2 m
- Protective field height:
- 140 mm - 780 mm
- 2 Safety outputs (OSSD):
- 2 PNP
- Response time:
- 6.6 ms - 8.7 ms
- Connection type:
- M12
- Security level:
- PLe4
Review
Description
For KEYENCE GL-S Series Safety Light Curtain Flat Type Replacement Parameter
Brand | From network | DADISICK |
|
Models
|
GL-S08FH | ||
GL-S12FH |
|||
GL-S16FH | |||
GL-S20FH | |||
GL-S24FH | |||
GL-S28FH | |||
GL-S32FH | |||
GL-S36FH | |||
GL-S40FH | |||
Beam spacing | 20 mm | 20 mm | |
Protected altitude | 140 mm, 220 mm, 300 mm, 380 mm, 460 mm, 540 mm, 620 mm, 700 mm, 780 mm | 140 mm, 220 mm, 300 mm, 380 mm, 460 mm, 540 mm, 620 mm, 700 mm, 780 mm | |
Scanning range | 0.1 m - 2 m | 0.3 m - 6 m | |
Response time | 6.6 ms - 8.7 ms | ≤ 15 ms | |
Output method | 2 PNP | 2 PNP | |
Reliability and durability | IP65 / IP67 | IP65 | |
Connector | M12 | M12 | |
Housing cross-section | 15 mm × 30 mm | 30 mm × 30 mm | |
Safety Certificate | TÜV, UL, CE | TÜV, UL, CE, RoHS, GB | |
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. |
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand KEYENCE's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
Model:
QCE08-20-140 2BA, QCE12-20-220 2BA, QCE16-20-300 2BA, QCE20-20-380 2BA, QCE24-20-460 2BA, QCE28-20-540 2BA, QCE32-20-620 2BA, QCE36-20-700 2BA, QCE40-20-780 2BA
FAQ
What impact does the density of the light beam have on the safety light curtain?
The density of the light beam determines the volume of the body part that can pass through the light curtain and be detected.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.