For ASO Safety Solutions SENTIR edge for Industrial Applications Replacement | SENTIR edge 25-25 CN / GP 25-25CN / SKS 18
For ASO Safety Solutions SENTIR edge for Industrial Applications Replacement | SENTIR edge 25-25 CN / GP 25-25CN / SKS 18
For ASO Safety Solutions SENTIR edge for Industrial Applications Replacement | SENTIR edge 25-25 CN / GP 25-25CN / SKS 18
For ASO Safety Solutions SENTIR edge for Industrial Applications Replacement | SENTIR edge 25-25 CN / GP 25-25CN / SKS 18
For ASO Safety Solutions SENTIR edge for Industrial Applications Replacement | SENTIR edge 25-25 CN / GP 25-25CN / SKS 18
For ASO Safety Solutions SENTIR edge for Industrial Applications Replacement | SENTIR edge 25-25 CN / GP 25-25CN / SKS 18
Model
SENTIR edge | SENTIR edge 25-25 CN / GP 25-25CN / SKS 18

Item specifics

Series:
SENTIR edge
Sensor length:
Max. 25 m
Actuation distance:
3.3 mm
Actuation force:
48 N
Response time:
Cross-sectional area:
25 mm × 25 mm
Material:
NBR
Degree of protection:
IP65
Certifications:
TÜV, UL

Review

Description

For ASO Safety Solutions SENTIR edge for Industrial Applications Replacement Parameter
Brand
From network
DADISICK
Models
SENTIR edge 25-25 CN / GP 25-25CN / SKS 18
DB-PSE-230
Detection method
—
Pressure-sensitive
Sensor length
Max. 25 m
200 mm to 6000 mm
Actuation distance
3.3 mm
< 3 mm
Actuation force
48 N
≤ 25 N
Overtravel distance
7.2 mm (400 N)
< 19 mm
Response time
13 ms
Cross-sectional area
Width: 25 mm, Height: 25 mm
Width: 25 mm, Height: 30 mm (base not included, base height: 14 mm)
Maximum operation angle
2 × 45°
< 90°
Material
NBR
EPDM
Degree of protection
IP65
IP65
Connection
Max. 25 meters PUR LIY11Y 2 × 0.34 mm²
2 meters VVR Ø 4 mm 2 × 0.35 mm² (Red/black core)
Certifications
TÜV, UL
TÜV
Mechanical life
> 3,000,000 times
Ambient operating temperature
5°C to 55°C
-20℃ to 55℃
We are able to reproduce the specific connection configuration of each brand with high level of accuracy.
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety edges is a safety part made by DADISICK, not official brand ASO Safety Solutions's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
DADISICK Pressure-sensitive Safety Edges
DB-PSE series safety edges
Models:
DB-PSE-108
DB-PSE-110
DB-PSE-215
DB-PSE-230
DB-PSE-245
DB-PSE-345
DB-PSE-360

DB-PSE Series Satety Edges Dimensions
DB-PSE Series Satety Edges Cross-sectional area
DB-PSE Series Satety Edges Cross-Sectional Area
DB-PSE Series Satety Edges's Base dimensions
DB-PSE Series Satety Edges's Base Dimensions
FAQ
How do I choose the right Pressure Sensitive Safety Edge for my application?
Consider factors such as:
1. Length and shape of the edge needed
2. Sensitivity and response time required
3. Environmental conditions (e.g., indoor/outdoor, temperature range)
4. Compatibility with existing control systems
5. Compliance with industry-specific safety standards
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
Safety Edge Electrical Wiring Diagrams
2-Wire Edges Connected Relay Ter-A Safety Input With Manual Reset
Sensing Output - A Satety Edge And Safety Relay Wiring Diagram
Dual Channel 4-Wire Edges Connected Relay Ter-A Safety Input With Manual Reset
Sensing Output - Combination Of Multiple Safety Edges In Series (R/K Type)
K-K Series Combination Of Safety Edges
Sensing Output - Combination Of Multiple Safety Edges In Series (K/K Type)
R-K Series Combination Of Safety Edges
Sensing Output - Combination Of Multiple Safety Edges In Series (R/K Type Combination Using Terminal Blocks)
DB-PSE Safety Edge Data Sheet

recommend