For Schmersal SE-P70 Series Safety Edges Replacement | SE-P70-10000 PACKED RUBBER PROFILE 10 M
- Model
- SE-P70 Series | SE-P70-10000 PACKED RUBBER PROFILE 10 M
Item specifics
- Series:
- SE-P70 Series
- Sensor length:
- 10 m
- Actuation distance:
- 8 mm
- Actuation force:
- 22 N
- Response time:
- ＜ 16 ms
- Cross-sectional area:
- 30 mm × 70 mm
- Material:
- EPDM, 65 Shore A
- Degree of protection:
- IP67
- Certifications:
- TÜV
Review
Description
For Schmersal SE-P70 Series Safety Edges Replacement Parameter
Brand | From network | DADISICK |
||
Models | SE-P70-10000 PACKED RUBBER PROFILE 10 M |
DB-PSE-245 | ||
Detection method | Photoelectric | Pressure-sensitive | ||
Sensor length | 10 m | 200 mm to 6000 mm | ||
Actuation distance | 8 mm | ＜ 3 mm | ||
Actuation force | 22 N | ≤ 25 N | ||
Overtravel distance | 53 mm (400 N) | ＜ 30 mm | ||
Response time | ＜ 16 ms | 13 ms | ||
Cross-sectional area | Width: 25 mm, Height: 70 mm | Width: 25 mm, Height: 45 mm (base not included, base height: 14 mm) | ||
Maximum operation angle | — | ＜ 90° | ||
Material | EPDM, 65 Shore A | EPDM | ||
Degree of protection | IP67 | IP65 | ||
Connection | — | 2 meters VVR Ø 4 mm 2 × 0.35 mm² (Red/black core) | ||
Certifications | TÜV | TÜV | ||
Mechanical life | ＞ 20,000,000 Operations | ＞ 3,000,000 times | ||
Ambient operating temperature | -30°C to 140°C | -20℃ to 55℃ | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | ||||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety edges is a safety part made by DADISICK, not official brand Schmersal's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
DB-PSE series safety edges
DB-PSE Series Satety Edges Dimensions
DB-PSE Series Satety Edges Cross-sectional area
DB-PSE Series Satety Edges's Base dimensions
FAQ
How do I maintain Pressure Sensitive Safety Edges?
1. Inspecting for physical damage or wear
2. Testing pressure sensitivity and response
3. Ensuring secure connections to the control unit
4. Cleaning to remove debris and prevent false activations
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
