For Rockwell Automation 440F Series Safety Edges Replacement | 440F-E0110R20
- Model
- 440F Series | 440F-E0110R20
Item specifics
- Series:
- 440F Series
- Sensor length:
- Custom (Max. length 50 m)
- Actuation distance:
- 6.6 mm
- Actuation force:
- 41.7 N
- Response time:
- ＜ 13 ms
- Cross-sectional area:
- 28.5 mm × 24.5 mm
- Material:
- EPDM
- Degree of protection:
- IP67
- Certifications:
- TÜV, CE, UKCA
Review
Description
For Rockwell Automation 440F Series Safety Edges Replacement Parameter
Brand | From network | DADISICK |
||
Models | 440F-E0110R20 |
DB-PSE-230 | ||
Detection method | Pressure-sensitive | Pressure-sensitive | ||
Sensor length | Custom (Max. length 50 m) | 200 mm to 6000 mm | ||
Actuation distance | 6.6 mm | ＜ 3 mm | ||
Actuation force | 41.7 N (Test-Speed 10 mm/s) | ≤ 25 N | ||
Overtravel distance | 11 mm (400 N) | ＜ 30 mm | ||
Response time | ＜ 13 ms | 13 ms | ||
Cross-sectional area | Width: 28.5 mm, Height: 24.5 mm | Width: 25 mm, Height: 30 mm (base not included, base height: 14 mm) | ||
Maximum operation angle | ±20° | ＜ 90° | ||
Material | EPDM | EPDM | ||
Degree of protection | IP67 | IP65 | ||
Connection | — | 2 meters VVR Ø 4 mm 2 × 0.35 mm² (Red/black core) | ||
Certifications | TÜV, CE, UKCA | TÜV | ||
Mechanical life | — | ＞ 3,000,000 times | ||
Ambient operating temperature | -5°C to 55°C | -20℃ to 55℃ | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | ||||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety edges is a safety part made by DADISICK, not official brand Rockwell Automation's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
DB-PSE series safety edges
DB-PSE Series Satety Edges Dimensions
DB-PSE Series Satety Edges Cross-sectional area
DB-PSE Series Satety Edges's Base dimensions
FAQ
What is the difference between Safety Edges and Safety Mats?
Safety edges are pressure-sensitive devices installed on the edges of moving parts, while safety mats are pressure-sensitive floor mats used to detect the presence of people in a specific area. Both serve to enhance safety but are used in different applications.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
