For Schmersal SMS 4 Series 500 mm x 500 mm Safety Pressure Mats Replacement | 4-wire Connecting Cable Type
- Model
- SMS 4 Series | SMS 4-500-500
Item specifics
- Series:
- SMS 4 Series
- Activation force:
- 150 N with round body Ø 80 mm
- Maximum load:
- 2,000 N / Ø 80 mm
- Response time:
- ≤ 25 ms
- Material:
- Polyurethane PUR
- Degree of protection:
- IP65
- Certifications:
- TÜV, cULus
Review
Description
For Schmersal SMS 4 Series 500 mm x 500 mm Safety Pressure Mats Replacement Parameter
Brand | From network | DADISICK |
||
Models | SMS 4-500-500 |
DT15-50X50 | ||
Dimensions | 500 mm × 500 mm × 14 mm | 500 mm × 500 mm × 15 mm | ||
Activation force | 150 N with round body Ø 80 mm | 20 kg min. (20 kgf ≈ 196.1 N) | ||
Maximum load | 2,000 N / Ø 80 mm | 400 N/cm² | ||
Response time | ≤ 25 ms | 18 ms | ||
Material | Polyurethane PUR | NBR | ||
Degree of protection | IP65 | IP65 / IP67 | ||
Certifications | TÜV, cULus | TÜV | ||
Connection | 4-wire connecting cable | Quick-connect: Two ends 0.1 meter cable (Ø 4 mm 2 × 0.2 mm²)
R Type: 5 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
K Type: 2 cables 2 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²) | ||
Mechanical life | ＞ 1,500,000 times | ＞ 3,000,000 times | ||
Ambient operating temperature | 0℃ to 55℃ | -10℃ to 55℃ | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | ||||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety pressure mats is a safety part made by DADISICK, not official brand Schmersal's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
DT15 series safety mats
Models：
DT15-30X30, DT15-40X40, DT15-50X25, DT15-50X40,
DT15-50X50, DT15-60X40, DT15-75X25, DT15-75X50,
DT15-75X75, DT15-100X25, DT15-100X50, DT15-100X75,
DT15-100X100, DT15-150X50, DT15-150X75, DT15-150X100
Tips:
For non-standard dimensions of safety mats, the side length should be ＜ 3000 mm, and the area should ≤ 1.5 m².
FAQ
How do you determine the size of a safety mat?
A: The size of a safety mat needs to be determined based on the specific installation location and protection requirements. Ensure that the mat's size matches the protected area.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
