For ABB ASK-Series 1000 mm x 1500 mm Aluminum Edge Safety Mat Replacement
- Model
- ASK-Series | ASK-1U4.4-NP
Item specifics
- Series:
- ASK-Series
- Activation force:
- Nominally 150 N (Round body 80 mm)
- Maximum load:
- 2000 N over Ø 80 mm
- Response time:
- Please refer to the following
- Material:
- Black polyurethane
- Degree of protection:
- IP65
- Certifications:
- cULus, TÜV
Review
Description
For ABB ASK-Series 1000 mm x 1500 mm Aluminum Edge Safety Mat Replacement Parameter
Brand | From network | DADISICK |
||
Models | ASK-1U4.4-NP |
DT15-150X100 | ||
Dimensions | 1000 mm × 1500 mm × 14 mm | 1000 mm × 1500 mm × 15 mm | ||
Activation force | Nominally 150 N (Round body 80 mm) | 20 kg min. (20 kgf ≈ 196.1 N) | ||
Maximum load | 2000 N over Ø 80 mm | 400 N/cm² | ||
Response time | Including Sentry < 20 ms, Including Pluto (single Pluto) < 30 ms Including Pluto incl. Pluto bus: Normal condition: < 40 ms At fault condition: < 70 ms | 18 ms | ||
Material | Black polyurethane | NBR | ||
Degree of protection | IP65 | IP65 / IP67 | ||
Certifications | cULus, TÜV | TÜV | ||
Connection | M8 | Quick-connect: Two ends 0.1 meter cable (Ø 4 mm 2 × 0.2 mm²)
R Type: 5 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
K Type: 2 cables 2 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²) | ||
Mechanical life | ＞ 1,000,000 times | ＞ 3,000,000 times | ||
Ambient operating temperature | -10℃ to 55℃ | -10℃ to 55℃ | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | ||||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety mats is a safety part made by DADISICK, not official brand ABB's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
DT15 series safety mats
Models：
DT15-30X30, DT15-40X40, DT15-50X25, DT15-50X40,
DT15-50X50, DT15-60X40, DT15-75X25, DT15-75X50,
DT15-75X75, DT15-100X25, DT15-100X50, DT15-100X75,
DT15-100X100, DT15-150X50, DT15-150X75, DT15-150X100
Tips:
For non-standard dimensions of safety mats, the side length should be ＜ 3000 mm, and the area should ≤ 1.5 m².
FAQ
Can pressure sensitive safety mats be integrated with other safety systems?
A: Yes, pressure sensitive safety mats can be integrated with other safety devices, such as light curtains, safety gate switches, and emergency stop buttons, to create a comprehensive safety system that provides more extensive protection.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
