ASK-Series 1000 mm x 750 mm Cast-in Ramp Edge Trim Safety Mat Replacement
- Model
- ASK-Series | ASK-1T4.4-NP 1x0.75
Item specifics
- Series:
- ASK-Series
- Activation force:
- Nominally 150 N (Round body 80 mm)
- Maximum load:
- 2000 N over Ø 80 mm
- Response time:
- Please refer to the following
- Material:
- Black polyurethane
- Degree of protection:
- IP65
- Certifications:
- cULus, TÜV
Review
Description
ASK-Series 1000 mm x 750 mm Cast-in Ramp Edge Trim Safety Mat Replacement Parameter
Brand | From network | DADISICK |
||
Models | ASK-1T4.4-NP 1x0.75 |
DT15-100X75 | ||
Dimensions | 1000 mm × 750 mm × 14 mm | 1000 mm × 750 mm × 15 mm | ||
Activation force | Nominally 150 N (Round body 80 mm) | 20 kg min. (20 kgf ≈ 196.1 N) | ||
Maximum load | 2000 N over Ø 80 mm | 400 N/cm² | ||
Response time | Including Sentry < 20 ms, Including Pluto (single Pluto) < 30 ms Including Pluto incl. Pluto bus: Normal condition: < 40 ms At fault condition: < 70 ms | 18 ms | ||
Material | Black polyurethane | NBR | ||
Degree of protection | IP65 | IP65 / IP67 | ||
Certifications | cULus, TÜV | TÜV | ||
Connection | M8 | Quick-connect: Two ends 0.1 meter cable (Ø 4 mm 2 × 0.2 mm²)
R Type: 5 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
K Type: 2 cables 2 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²) | ||
Mechanical life | ＞ 1,000,000 times | ＞ 3,000,000 times | ||
Ambient operating temperature | -10℃ to 55℃ | -10℃ to 55℃ | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | ||||
Product model display instructions
The product models displayed on this page are only used to describe and compare the characteristics, specifications, and performance of different products. These models do not represent recommendations or associations for any specific brand or company. When users choose products, please understand and compare the detailed information of each brand's products on your own.
Product recommendations
DT15 series safety mats
Models：
DT15-30X30, DT15-40X40, DT15-50X25, DT15-50X40,
DT15-50X50, DT15-60X40, DT15-75X25, DT15-75X50,
DT15-75X75, DT15-100X25, DT15-100X50, DT15-100X75,
DT15-100X100, DT15-150X50, DT15-150X75, DT15-150X100
Tips:
For non-standard dimensions of safety mats, the side length should be ＜ 3000 mm, and the area should ≤ 1.5 m².
FAQ
Do pressure sensitive safety mats comply with safety standards?
A: Most pressure sensitive safety mats comply with relevant international and regional safety standards, such as ISO 13856-1 (Safety of Machinery - Pressure-sensitive protective devices for industrial applications), and should adhere to local safety regulations.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
