For Rockwell Automation 440F Series 900 mm x 1000 mm Pressure-sensitive Safety Mats Replacement
For Rockwell Automation 440F Series 900 mm x 1000 mm Pressure-sensitive Safety Mats Replacement
For Rockwell Automation 440F Series 900 mm x 1000 mm Pressure-sensitive Safety Mats Replacement
For Rockwell Automation 440F Series 900 mm x 1000 mm Pressure-sensitive Safety Mats Replacement
For Rockwell Automation 440F Series 900 mm x 1000 mm Pressure-sensitive Safety Mats Replacement
For Rockwell Automation 440F Series 900 mm x 1000 mm Pressure-sensitive Safety Mats Replacement
Model
440F | 440F-M1820BYNN

Item specifics

Series:
440F Series
Activation force:
35 kg (77 lb)
Maximum load:
Can withstand a static pressure of 4500 psi
Response time:
35 ms
Material:
Polycarbonate
Degree of protection:
IP67
Certifications:
CE, cULus

Review

Description

For Rockwell Automation 440F Series 900 mm x 1000 mm Pressure-sensitive Safety Mats Replacement Parameter
Brand
From network
DADISICK
Models
440F-M1820BYNN
DT15-100X100
Dimensions
900 mm × 1000 mm × 16 mm
1000 mm × 1000 mm × 15 mm
Activation force
35 kg (77 lb)
20 kg min. (20 kgf ≈ 196.1 N)
Maximum load
Can withstand a static pressure of 4500 psi
400 N/cm²
Response time
35 ms
18 ms
Material
Polycarbonate
NBR
Degree of protection
IP67
IP65 / IP67
Certifications
TÜV, CE, cULus, UKCA, RCM
TÜV
Connection
M12
Quick-connect: Two ends 0.1 meter cable (Ø 4 mm 2 × 0.2 mm²)
R Type: 5 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
K Type: 2 cables 2 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
Mechanical life
> 1,000,000 times
> 3,000,000 times
Ambient operating temperature
-10℃ to 55℃
-10℃ to 55℃
We are able to reproduce the specific connection configuration of each brand with high level of accuracy.
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety mats is a safety part made by DADISICK, not official brand Rockwell Automation's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
DADISICK Pressure Sensitive Safety Mats
DT15 series safety mats
Models:
DT15-30X30, DT15-40X40, DT15-50X25, DT15-50X40,
DT15-50X50, DT15-60X40, DT15-75X25, DT15-75X50,
DT15-75X75, DT15-100X25, DT15-100X50, DT15-100X75,
DT15-100X100, DT15-150X50, DT15-150X75, DT15-150X100

Tips:
For non-standard dimensions of safety mats, the side length should be < 3000 mm, and the area should ≤ 1.5 m².

FAQ
Can the sensitivity of a safety mat be adjusted?
A: Yes, the sensitivity of a safety mat can be adjusted according to needs. By adjusting the mat's sensing threshold, it can adapt to different working environments and protection requirements.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
Satety Mat Electrical Wiring Diagrams
K-Type Dual Channel 4-Wire Mat Connected Relay Ter-A Safety Input With Manual Reset
The control principle diagram of safety mat safety protection

R-Type 2-Wire Mat Connected Relay Ter-A Safety Input With Manual Reset
The control principle diagram of safety mat safety protection
Sensing Output - K-K Series Combination Of Safety Mats
Sensing Output - R/K Series Combination Of Safety Mats
Sensing Output - R-K Series Combination Of Safety Mats
Sensing Output - K/K Series Combination Of Safety Mats
DT15 Series Safety Mat Data Sheet