For Rockwell Automation 440F Series 500 mm x 1200 mm Pressure-sensitive Safety Mats Replacement
- Model
- 440F | 440F-M1024BYNN
Item specifics
- Series:
- 440F Series
- Activation force:
- 35 kg (77 lb)
- Maximum load:
- Can withstand a static pressure of 4500 psi
- Response time:
- 35 ms
- Material:
- Polycarbonate
- Degree of protection:
- IP67
- Certifications:
- CE, cULus
Review
Description
For Rockwell Automation 440F Series 500 mm x 1200 mm Pressure-sensitive Safety Mats Replacement Parameter
Brand | From network | DADISICK |
||
Models | 440F-M1024BYNN |
DT15 Series Safety Mats | ||
Dimensions | 500 mm × 1200 mm × 16 mm | |||
Activation force | 35 kg (77 lb) | 20 kg min. (20 kgf ≈ 196.1 N) | ||
Maximum load | Can withstand a static pressure of 4500 psi | 400 N/cm² | ||
Response time | 35 ms | 18 ms | ||
Material | Polycarbonate | NBR | ||
Degree of protection | IP67 | IP65 / IP67 | ||
Certifications | TÜV, CE, cULus, UKCA, RCM | TÜV | ||
Connection | M12 | Quick-connect: Two ends 0.1 meter cable (Ø 4 mm 2 × 0.2 mm²)
R Type: 5 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
K Type: 2 cables 2 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²) | ||
Mechanical life | ＞ 1,000,000 times | ＞ 3,000,000 times | ||
Ambient operating temperature | -10℃ to 55℃ | -10℃ to 55℃ | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | ||||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety mats is a safety part made by DADISICK, not official brand Rockwell Automation's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
DT15 series safety mats
Models：
DT15-30X30, DT15-40X40, DT15-50X25, DT15-50X40,
DT15-50X50, DT15-60X40, DT15-75X25, DT15-75X50,
DT15-75X75, DT15-100X25, DT15-100X50, DT15-100X75,
DT15-100X100, DT15-150X50, DT15-150X75, DT15-150X100
Tips:
For non-standard dimensions of safety mats, the side length should be ＜ 3000 mm, and the area should ≤ 1.5 m².
FAQ
How should pressure sensitive safety mats be maintained and tested?
A: Regularly clean the surface of the mat to prevent dust and debris buildup. Test the mat's functionality periodically according to the manufacturer's recommendations, ensuring it operates correctly. Testing methods usually involve applying known pressure and verifying the control system's response.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
