For Omron UMA Series 1000 mm x 1250 mm Safety Mats Replacement | 2-cable Mats
- Model
- UMA Series | UMMA-1000-1250-2, UMMYA-1000-1250-2
Item specifics
- Series:
- UMA Series
- Activation force:
- 300 N min. to 80 mm dia. test piece
- Maximum load:
- 2,000 N to 80 mm dia. test piece
- Response time:
- 50 ms max
- Material:
- Polyurethane
- Degree of protection:
- IP65
- Certifications:
- CE
Review
Description
For Omron UMA Series 1000 mm x 1250 mm Safety Mats Replacement Parameter
Brand | From network | DADISICK |
||
Models | UMMA-1000-1250-2 |
DT15-150X100
| ||
UMMYA-1000-1250-2 | ||||
Dimensions | 1000 mm × 1250 mm | 1500 mm × 1000 mm | ||
Activation force | 300 N min. to 80 mm dia. test piece | 20 kg min. (20 kgf ≈ 196.1 N) | ||
Maximum load | 2,000 N to 80 mm dia. test piece | 400 N/cm² (up to 8 h) | ||
Response time | 50 ms max | 18 ms | ||
Material | Polyurethane | NBR | ||
Degree of protection | IP65 | IP65 / IP67 | ||
Certifications | CE | TÜV | ||
Connection | 2/5/10 meters M8 4-pin | Quick-connect: Two ends 0.1 meter cable (Ø 4 mm 2 × 0.2 mm²)
R Type: 5 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
K Type: 2 cables 2 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²) | ||
Mechanical life | ＞ 1,000,000 times | ＞ 3,000,000 times | ||
Ambient operating temperature | -10℃ to 55℃ | -10℃ to 55℃ | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | ||||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety mats is a safety part made by DADISICK, not official brand Omron's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
DT15 series safety mats
Models：
DT15-30X30, DT15-40X40, DT15-50X25, DT15-50X40,
DT15-50X50, DT15-60X40, DT15-75X25, DT15-75X50,
DT15-75X75, DT15-100X25, DT15-100X50, DT15-100X75,
DT15-100X100, DT15-150X50, DT15-150X75, DT15-150X100
Tips:
For non-standard dimensions of safety mats, the side length should be ＜ 3000 mm, and the area should ≤ 1.5 m².
FAQ
How do pressure sensitive safety mats work?
A: Pressure sensitive safety mats consist of two layers of conductive material. When pressure is applied, these layers come into contact, forming a circuit. The controller monitors the change in resistance to detect if there is pressure on the mat.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
