UMA Series 500 mm x 400 mm Safety Mats Replacement | 2-cable Mats
UMA Series 500 mm x 400 mm Safety Mats Replacement | 2-cable Mats
UMA Series 500 mm x 400 mm Safety Mats Replacement | 2-cable Mats
UMA Series 500 mm x 400 mm Safety Mats Replacement | 2-cable Mats
UMA Series 500 mm x 400 mm Safety Mats Replacement | 2-cable Mats
UMA Series 500 mm x 400 mm Safety Mats Replacement | 2-cable Mats
Model
UMA Series | UMMA-0500-0400-2, UMMYA-0500-0400-2

Item specifics

Series:
UMA Series
Activation force:
300 N min. to 80 mm dia. test piece
Maximum load:
2,000 N to 80 mm dia. test piece
Response time:
50 ms max
Material:
Polyurethane
Degree of protection:
IP65
Certifications:
CE

Review

Description

UMA Series 500 mm x 400 mm Safety Mats Replacement Parameter
Brand
From network
DADISICK
Models
UMMA-0500-0400-2
DT15-50X40
UMMYA-0500-0400-2
Dimensions
500 mm × 400 mm
500 mm × 400 mm
Activation force
300 N min. to 80 mm dia. test piece
20 kg min. (20 kgf ≈ 196.1 N)
Maximum load
2,000 N to 80 mm dia. test piece
400 N/cm² (up to 8 h)
Response time
50 ms max
18 ms
Material
Polyurethane
NBR
Degree of protection
  IP65
IP65 / IP67
Certifications
CE
TÜV
Connection
2/5/10 meters M8 4-pin
Quick-connect: Two ends 0.1 meter cable (Ø 4 mm 2 × 0.2 mm²)
R Type: 5 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
K Type: 2 cables 2 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
Mechanical life
> 1,000,000 times
> 3,000,000 times
Ambient operating temperature
-10℃ to 55℃
-10℃ to 55℃
We are able to reproduce the specific connection configuration of each brand with high level of accuracy.
Product model display instructions
The product models displayed on this page are only used to describe and compare the characteristics, specifications, and performance of different products. These models do not represent recommendations or associations for any specific brand or company. When users choose products, please understand and compare the detailed information of each brand's products on your own.
Product recommendations
DADISICK Pressure Sensitive Safety Mats
DT15 series safety mats
Models:
DT15-30X30, DT15-40X40, DT15-50X25, DT15-50X40,
DT15-50X50, DT15-60X40, DT15-75X25, DT15-75X50,
DT15-75X75, DT15-100X25, DT15-100X50, DT15-100X75,
DT15-100X100, DT15-150X50, DT15-150X75, DT15-150X100

Tips:
For non-standard dimensions of safety mats, the side length should be < 3000 mm, and the area should ≤ 1.5 m².

FAQ
How do safety mats connect to machines?
A: Safety mats connect to machines through internal membrane switches. When a set weight is applied to the mat, the switch closes, sending a stop signal to the protected machine to halt its movement.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
Satety Mat Electrical Wiring Diagrams
K-Type Dual Channel 4-Wire Mat Connected Relay Ter-A Safety Input With Manual Reset
The control principle diagram of safety mat safety protection
R-Type 2-Wire Mat Connected Relay Ter-A Safety Input With Manual Reset
The control principle diagram of safety mat safety protection

Sensing Output - K-K Series Combination Of Safety Mats
Sensing Output - R/K Series Combination Of Safety Mats
Sensing Output - R-K Series Combination Of Safety Mats
Sensing Output - K/K Series Combination Of Safety Mats
DT15 Series Safety Mat Data Sheet