For Wenglor PNBC Series 25 to 35 mm and 20 to 24 mm and 40 to 60 mm Detection Range Laser Distance Sensor Triangulation Replacement
- Model
- PNBC Series | PNBC002, PNBC102, PNBC001, PNBC101, PNBC103
Item specifics
- Series:
- PNBC Series
- Detection range:
- 25 to 35 mm, 20 to 24 mm, 40 to 60 mm
- Repeatability:
- 0.06 µm, 0.15 µm, 4 µm, 5 µm, 8 µm
- Sensing beam:
- Laser (red) 658nm
- Output:
- Analog
- Material
- Aluminum anodised
- Connector:
- M12
Review
Description
For Wenglor PNBC Series 25 to 35 mm and 20 to 24 mm and 40 to 60 mm Detection Range Laser Distance Sensor Triangulation Replacement Parameter
Brand | From network | DADISICK |
|
Models | PNBC002 |
GFL-G30NM | |
PNBC102 | |||
PNBC001 | |||
PNBC101 | |||
PNBC103 | GFL-G50NM | ||
Technical parameters | Detection range | 25 to 35 mm, 20 to 24 mm, 40 to 60 mm | 30mm, 50mm |
Repeatability | 0.06 µm, 0.15 µm, 4 µm, 5 µm, 8 µm | 2um (In fast mode 4μm), 5um (In fast mode 8μm) | |
Sensing beam | Laser (red) 658nm | Red semiconductor laser IEC/JIS: class2, FDA: classII | |
Output | Analog | NPN/analog | |
Power source | 15 to 30 V DC | DC12~24V (+10%/—5%) | |
Material | Aluminum anodised | Shell: aluminum alloy lens: PMMA | |
Connector | M12 | φ5 6-core 2-meter long cable (PVC) AWG24 | |
Enclosure rating | IP67 | IP64 | |
Ambient operating temperature | -10 to 40 °C | -10C to +45℃ | |
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | |||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand Wenglor's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
FAQ
1. What are the installation requirements for laser displacement sensors?
Laser displacement sensors should be installed in a stable, vibration-free location, ensuring the laser beam is unobstructed. The installation position and angle should be adjusted according to specific measurement needs, following the manufacturer's installation guidelines.
2. Do laser displacement sensors get affected by ambient light during measurements?
Laser displacement sensors can be affected by strong ambient light. However, modern sensors usually have excellent anti-interference capabilities, using filtering and signal processing techniques to effectively reduce the impact of ambient light on measurement results.
3. What are the maintenance requirements for laser displacement sensors?
Keep the sensor's optical components clean to prevent dust and dirt from affecting measurement accuracy. Regularly inspect and replace any worn parts, and follow the manufacturer's maintenance manual to ensure long-term stable operation.
4. Can laser displacement sensors be used in harsh environments?
Many laser displacement sensors are designed to operate in harsh environments, including high temperatures, low temperatures, dust, and humidity. When purchasing, it's important to check the sensor's environmental adaptability and protection rating.
5. What is the measurement range of laser displacement sensors?
The measurement range of laser displacement sensors varies by model, typically spanning from a few millimeters to several hundred meters. Selecting the appropriate range depends on specific application requirements.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
