For Mayser SM Series Safety Mats Replacement
- Model
- SM Series | SM with GM 1, SM with GM 5
Item specifics
- Series:
- SM Series
- Activation force:
- < 300 N (Ø 80 mm or Ø 11 mm), < 600 N (Ø 200 mm)
- Maximum load:
- Max. 800 or 1200 N/cm², Static load (up to 8 h)
- Response time:
- 23 ms
- Material:
- NBR
- Degree of protection:
- IP65
- Certifications:
- TÜV, CE
Review
Description
For Mayser SM Series Safety Mats Replacement Parameter
Brand | From network | DADISICK |
||
Models |
Dimensions |
Models | Dimensions | |
Technical data | SM with GM 1 | W × D ≤ 1.5 m² |
We offer custom safety mat services.
For non-standard dimensions of safety mats,
the side length should be ＜ 3000 mm, and the area should ≤ 1.5 m². | |
SM with GM 5 | ||||
Activation force | < 300 N (Test piece (cylinder) Ø 11 mm) < 300 N (Test piece (cylinder) Ø 80 mm) < 600 N (Test piece (cylinder) Ø 200 mm) | 30 kg (30 kgf ≈ 294.2 N) | ||
Maximum load | Max. 800 N/cm², Static load (up to 8 h) Max. 1200 N/cm², Static load (up to 8 h) | 400 N/cm² (up to 8 h) 800 N/cm², Static load (up to 8 h) | ||
Response time | 23 ms | ＜ 30 ms | ||
Material | NBR | NBR | ||
Degree of protection | IP65 | IP65 | ||
Certifications | TÜV, CE | TÜV | ||
Connection | M8 | 3 metes or 5 meters cable
Assembled Safety Mats: 2 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²) | ||
Mechanical life | ＞ 4,000,000 times | ＞ 1,000,000 times | ||
Ambient operating temperature | -5℃ to 55℃ | -10℃ to 60℃ | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | ||||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety mats is a safety part made by DADISICK, not official brand Mayser's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
DT14 series safety mats
Models：
DT14-250*500, DT14-500*500, DT14-500*1000,
DT14-750*1000, DT14-1000*1000, DT14-1100*1800
Tips:
For non-standard dimensions of safety mats, the side length should be ＜ 3000 mm, and the area should ≤ 1.5 m².
FAQ
What should be done if a safety mat is damaged?
A: If a safety mat is damaged, it should be taken out of service immediately and replaced. Do not attempt to repair a damaged mat, as this could compromise its safety performance.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
