For ASO Safety Solutions SENTIR mat Safety Mats Replacement
- Model
- SENTIR mat | SENTIR mat 14 U, SENTIR mat 14 T, SENTIR mat 14 ARB
Item specifics
- Series:
- SENTIR mat
- Activation force:
- 150 N to Ø 80 mm test piece
- Maximum load:
- max. 2000 N over Ø 80 mm
- Response time:
- < 25 ms
- Material:
- PUR black
- Degree of protection:
- IP65 / IP67
- Certifications:
- UL, TÜV
Review
Description
For ASO Safety Solutions SENTIR mat Safety Mats Replacement Parameter
Brand | From network | DADISICK |
||
Models |
Dimensions |
Models | Dimensions | |
Technical data | SENTIR mat 14 U | 1000 mm x 750 mm x 14 mm |
DT15-100X75 | 1000 mm × 750 mm × 15 mm |
1000 mm x 1000 mm x 14 mm | DT15-100X100 | 1000 mm × 1000 mm × 15 mm | ||
1000 mm x 1500 mm x 14 mm | DT15-150X100 | 1500 mm × 1000 mm × 15 mm | ||
SENTIR mat 14 T | 1000 mm x 750 mm x 14 mm | DT15-100X75 | 1000 mm × 750 mm × 15 mm | |
1000 mm x 1000 mm x 14 mm | DT15-100X100 | 1000 mm × 1000 mm × 15 mm | ||
1000 mm x 1500 mm x 14 mm | DT15-150X100 | 1500 mm × 1000 mm × 15 mm | ||
SENTIR mat 14 ARB | 2000 mm x 1250 mm x 14 mm | For non-standard dimensions of safety mats, the side length should be ＜ 3000 mm, and the area should ≤ 1.5 m² | ||
Activation force | 150 N to Ø 80 mm test piece | 20 kg min. (20 kgf ≈ 196.1 N) | ||
Maximum load | max. 2000 N over Ø 80 mm | 400 N/cm² | ||
Response time | < 25 ms | 18 ms | ||
Material | PUR black | NBR | ||
Degree of protection | IP65 / IP67 | IP65 / IP67 | ||
Certifications | UL, TÜV | TÜV | ||
Connection | M8 | Quick-connect: Two ends 0.1 meter cable (Ø 4 mm 2 × 0.2 mm²)
R Type: 5 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
K Type: 2 cables 2 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²) | ||
Mechanical life | ＞ 1,000,000 times | ＞ 3,000,000 times | ||
Ambient operating temperature | -10℃ to 55℃ | -10℃ to 55℃ | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | ||||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety mats is a safety part made by DADISICK, not official brand ASO Safety Solutions's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
DT15 series safety mats
Models：
DT15-30X30, DT15-40X40, DT15-50X25, DT15-50X40,
DT15-50X50, DT15-60X40, DT15-75X25, DT15-75X50,
DT15-75X75, DT15-100X25, DT15-100X50, DT15-100X75,
DT15-100X100, DT15-150X50, DT15-150X75, DT15-150X100
Tips:
For non-standard dimensions of safety mats, the side length should be ＜ 3000 mm, and the area should ≤ 1.5 m².
FAQ
Do pressure sensitive safety mats comply with safety standards?
A: Most pressure sensitive safety mats comply with relevant international and regional safety standards, such as ISO 13856-1 (Safety of Machinery - Pressure-sensitive protective devices for industrial applications), and should adhere to local safety regulations.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
