For Schmersal SHG Series Safety Switch with Separate Actuator 2 Contacts Replacement
- Model
- SHG Series | SHG01.103/90, SHG01.92/90, SHG01.220/110
Item specifics
- Series:
- SHG Series
- Locking principle:
- Operation Key
- Number of contacts:
- 2
- Direct Opening Force:
- -
- Material:
- —
- Connection:
- M20 x 1.5
- Security level:
- IP67
- Certifications:
- cULus, CCC
Review
Description
For Schmersal SHG Series Safety Switch with Separate Actuator 2 Contacts Replacement Parameter
Brand | From network | DADISICK |
|
Models | SHG01.103/90 |
OX-D2/OX-D3 series | |
SHG01.92/90 | |||
SHG01.220/110 | |||
Technical parameters | Sensor principle | Electro-mechanical | Electro-mechanical |
Locking principle | Operation Key | Operation Key | |
Number of contacts | 2 | 2 | |
Direct Opening Force | - | ≥ 60 N | |
Approach speed | - | 0.05 - 0.5 m/s | |
Actuation frequency | - | Up to 20 operations/min | |
Material | Aluminum | Resin, PA66 flame retardant | |
Connector | M20 x 1.5 | M20 | |
Power consumption | - | - | |
Rated insulation voltage (Ui) | 400 V | 400 V | |
Rated operating current (voltage) | 10A | AC-15: 2 A / AC 400 V | |
Rated impulse withstand voltage (Uimp) | 2.5 Kv | 4 kV | |
Enclosure rating | IP67 | IP67 | |
Ambient operating temperature | -25 to +70 °C | -20℃ to 60℃ | |
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | |||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety switch is a safety part made by DADISICK, not official brand Schmersal's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
FAQ
Q：What is an electromagnetic security door lock switch? ensure that the it not opened ？
Electromagnetic security door lock switch: As the name suggests, when power is applied, the lock generates magnetic force, causing the lock to engage and latch onto a small metal piece within the groove. When the power is turned off, the latch will reset and the lock opens as the magnetic force disappears. It also has the feature of unlocking when power is applied, and can control 6 pairs of contacts simultaneously, providing multiple mechanical signal outputs in either normally open or normally closed state. It can control more than 3 devices and can be used in conjunction with safety relays and contactors, offering powerful functionality.
To ensure that the electromagnetic security door lock switch is not opened after a power failure, you can consider the following measures:
The magnetic lock operates based on electromagnetic principles and does not have any mechanical structure. In recent years, magnetic locks have been widely used in automated production lines. Since they are part of an access control system, they require a power supply, usually a 12V DC power source. To ensure that the door lock is not opened during a power outage, the access control power supply box should be equipped with a backup battery (backup power supply).
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
