For Banner Mini-Array Series Measuring Light Curtain Replacement 19.1 mm Beam Spacing | 13.5 or 16.5 m Operating Range | 133 mm to 1810 mm Protective Height
- Model
- Mini-Array Series | BMEL616A, BMEL1216A, BMEL1816A, BMEL2416A, BMEL3016A, BMEL3616A, BMEL4216A, BMEL4816A, BMEL6016A, BMEL7216A, BMRL616A, BMRL1216A, BMRL1816A, BMRL2416A, BMRL3016A, BMRL3616A, BMRL4216A, BMRL4816A, BMRL6016A, BMRL7216A
Item specifics
- Series:
- Mini-Array Series
- Beam spacing:
- 19.1 mm
- Number of beams:
- 8/16/24/32/40/48/56/64/80/96
- Operating range:
- 0.9 m - 13. 5 m / 0.9 m - 16.5 m
- Protective height:
- 133 mm - 1810 mm
- Output type:
- NPN & PNP / Analog / RS232 & RS485 output
- Connection type:
- M16
- IP Degree of protection
- IP65
Review
Description
For Banner Mini-Array Series Measuring Light Curtain Replacement Parameter
Brand | From network | DADISICK |
|
Emitter |
Receiver |
||
Models | BMEL616A | BMRL616A |
QLT08-20-140 |
BMEL1216A | BMRL1216A | QLT16-20-300 | |
BMEL1816A | BMRL1816A | QLT24-20-460 | |
BMEL2416A | BMRL2416A | QLT30-20-580 | |
BMEL3016A | BMRL3016A | QLT38-20-740 | |
BMEL3616A | BMRL3616A | QLT46-20-900 | |
BMEL4216A | BMRL4216A | QLT54-20-1060 | |
BMEL4816A | BMRL4816A | QLT62-20-1220 | |
BMEL6016A | BMRL6016A | QLT76-20-1500 | |
BMEL7216A | BMRL7216A | QLT92-20-1820 | |
Beam spacing | 19.1 mm | 20 mm | |
Number of beams | 8, 16, 24, 32, 40, 48, 56, 64, 80, 96 | 8, 16, 24, 30, 38, 46, 54, 62, 76, 92 | |
Protective height | 133 mm, 286 mm, 438 mm, 591 mm, 743 mm, 895 mm, 1048 mm, 1200 mm, 1505 mm, 1810 mm | 140 mm, 300 mm, 460 mm, 580 mm, 740 mm, 900 mm, 1060 mm, 1220 mm, 1500 mm, 1820 mm | |
Operating range | 0.9 m - 13. 5 m / 0.9 m - 16.5 m | 0.3 m - 30 m | |
Output method | NPN & PNP output
Analog current output 4-20 mA
Analog voltage output 0-10 V RS232 & RS485 output | NPN & PNP output
Analog current output 4-20 mA
Analog voltage output 0-10 V RS232 & RS485 output | |
IP Degree of protection | IP65 | IP65 | |
Connector | M16 | M16 | |
Housing cross-section | 38.1 mm × 38.1 mm | 51 mm × 35 mm | |
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | |||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand Banner's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
QLT series measuring light curtains
Model：
QLT8-20-140, QLT16-20-300, QLT24-20-460,
QLT30-20-580, QLT38-20-740, QLT46-20-900,
QLT54-20-1060, QLT62-20-1220, QLT76-20-1500,
QLT92-20-1820
FAQ
Can Measuring Light Curtains be used for safety applications?
A: Yes, some Measuring Light Curtains are designed to meet safety standards and can be used for machine safeguarding and other safety applications. Always check if the light curtain complies with relevant safety standards (e.g., IEC 61496).
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
