For IPF ELECTRONIC PUSHBUTTONS Series Plastic Ultrasonic Sensors Replacement | Sensing Range 300 mm to 3500 mm and 350 mm to 3500 mm
- Model
- PUSHBUTTONS Series | UT300020, UT300025, UT300029
Item specifics
- Series:
- PUSHBUTTONS Series
- Size:
- M30
- Sensing Distance:
- 300 - 3500 mm / 350 - 3500 mm
- Output Method:
- 4-20mA PNP
- Connection Type:
- M12
- Security level:
- IP67
- Material:
- Plastic
Review
Description
For IPF ELECTRONIC PUSHBUTTONS Series Plastic Ultrasonic Sensors Replacement | Sensing Range 300 mm to 3500 mm and 350 mm to 3500 mm Parameter
Brand | From network | DADISICK |
|
Models | UT300020 | CSB30-4000-J60-I-V15 | |
UT300025 | CSB30-4000-J60-E3-V15 | ||
UT300029 | CSB30-4000-J60-E3-V15 | ||
Thread Size | M30 | M30 | |
Sensing Distance | 300 - 3500 mm / 350 - 3500 mm | 200 mm - 4000 mm | |
Output Method | 4-20mA PNP | Single analog current 4-20mA output Single PNP switch output | |
Connector | M12 | M12 | |
Security level | IP67 | IP67 | |
Material | Plastic | Copper nickel plating | |
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | |||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand IPF ELECTRONIC's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
FAQ
1. Please describe the maintenance procedures for ultrasonic sensors.
It is important to regularly check the cleanliness of the transducer to avoid dust and dirt from affecting the transmitting and receiving functions of the transducer. It is important to calibrate the sensor on a regular basis to ensure that the measurements are accurate. Following the maintenance guide provided by the manufacturer will ensure the sensor's optimal performance and longevity.
2. What precautions should be taken when using ultrasonic sensors in outdoor environments?
When used outdoors, it is important to consider the ambient temperature, humidity, and wind speed in order to ensure optimal sensor performance. The selection of waterproof and dustproof designs for ultrasonic sensors can enhance their reliability in harsh environments.
3. Please describe the installation requirements for ultrasonic sensors.
Ultrasonic sensors should be installed in a location that avoids obstructions and reflective surfaces, keeps the transmitting and receiving areas of the sensor clean, and follows the manufacturer's installation guidelines to ensure optimal performance.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
