30GM70 Series Diffuse Mode Ultrasonic Sensors Replacement | Sensing Range 200 mm to 3500 mm and 350 mm to 6000 mm
- Model
- 30GM70 Series | UC3500-30GM70-2E2R2-V15, UC3500-30GM70-IE2R2-V15, UC3500-30GM70-UE2R2-V15, UC6000-30GM70-2E2R2-V15, UC6000-30GM70-IE2R2-V15, UC6000-30GM70-UE2R2-V15
Item specifics
- Series:
- 30GM70 Series
- Size:
- M30
- Sensing Distance:
- 200...3500 mm / 350...6000 mm
- Output Method:
- PNP / Analog output
- Connection Type:
- M12
- Security level:
- IP67
- Material:
- Nickel plated brass
Review
Description
30GM70 Series Diffuse Mode Ultrasonic Sensors Replacement Parameter
Brand | From network | DADISICK |
|
Models | UC3500-30GM70-2E2R2-V15 | CSB30-4000-J60-E6-V15 | |
UC3500-30GM70-IE2R2-V15 | CSB30-4000-J60-E3-V15 | ||
UC3500-30GM70-UE2R2-V15 | CSB30-4000-J60-E3-V15 | ||
UC6000-30GM70-2E2R2-V15 | CSB30-6000-J70-E6-V15 | ||
UC6000-30GM70-IE2R2-V15 | CSB30-6000-J70-E5-V15 | ||
UC6000-30GM70-UE2R2-V15 | CSB30-6000-J70-E3-V15 | ||
Thread Size | M30 | M30 | |
Sensing Distance | 200...3500 mm / 350...6000 mm | 200 - 4000 mm / 350 - 6000 mm | |
Output Method | 2*PNP NO/NC 2 switch outputs PNP, NC
(NO contact programmable);
1 switch output PNP, NO
(NC contact programmable) | 1 PNP switch output, NO/NC 2 PNP switch output, NO/NC | |
Connector | M12 | M12 | |
Security level | IP67 | IP67 | |
Material | Nickel plated brass | Nickel plated copper | |
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | |||
Product model display instructions
The product models displayed on this page are only used to describe and compare the characteristics, specifications, and performance of different products. These models do not represent recommendations or associations for any specific brand or company. When users choose products, please understand and compare the detailed information of each brand's products on your own.
Product recommendations
Model:
CSB30-4000-J60-E6-V15, CSB30-4000-J60-E3-V15
CSB30-6000-J70-E6-V15, CSB30-6000-J70-E5-V15
CSB30-6000-J70-E3-V15
FAQ
Please describe the maintenance procedures for ultrasonic sensors.
A: It is important to regularly check the cleanliness of the transducer to avoid dust and dirt from affecting the transmitting and receiving functions of the transducer. It is important to calibrate the sensor on a regular basis to ensure that the measurements are accurate. Following the maintenance guide provided by the manufacturer will ensure the sensor's optimal performance and longevity.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
