For PEPPERL+FUCHS UC-30GM Series Diffuse Mode Ultrasonic Sensors Replacement | Sensing Range 15 mm to 300 mm
For PEPPERL+FUCHS UC-30GM Series Diffuse Mode Ultrasonic Sensors Replacement | Sensing Range 15 mm to 300 mm
For PEPPERL+FUCHS UC-30GM Series Diffuse Mode Ultrasonic Sensors Replacement | Sensing Range 15 mm to 300 mm
For PEPPERL+FUCHS UC-30GM Series Diffuse Mode Ultrasonic Sensors Replacement | Sensing Range 15 mm to 300 mm
For PEPPERL+FUCHS UC-30GM Series Diffuse Mode Ultrasonic Sensors Replacement | Sensing Range 15 mm to 300 mm
For PEPPERL+FUCHS UC-30GM Series Diffuse Mode Ultrasonic Sensors Replacement | Sensing Range 15 mm to 300 mm
Model
UC-30GM Series | UC300-30GM-IUR2-V15

Item specifics

Series:
UC-30GM Series
Size:
M30
Sensing Distance:
15...300 mm
Output Method:
Analog output
Connection Type:
M12
Security level:
IP67
Material:
Nickel plated brass

Review

Description

For PEPPERL+FUCHS UC-30GM Series Diffuse Mode Ultrasonic Sensors Replacement Parameter
Brand
From network
DADISICK
Models
UC300-30GM-IUR2-V15
CSB30-2000-J60-IU-V15
Thread Size
M30
M30
Sensing Distance
15...300 mm
100 mm - 2000 mm
Output Method
Analog voltage output 0-10 V
Analog current output 4-20 mA
Analog voltage output 0-10 V
Analog current output 4-20 mA
Connector
M12
M12
Security level
IP67
IP67
Material
Nickel plated brass
Nickel plated copper
We are able to reproduce the specific connection configuration of each brand with high level of accuracy.
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand PEPPERL+FUCHS's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
FAQ
1. Can ultrasonic sensors be used for the detection of transparent objects?
Ultrasonic sensors can be used for the detection of any object.

2. Can ultrasonic sensors be used to automatically control the material level?
Can be used to automatically control the material level.

3. What is the power-on delay for the ultrasonic sensor?
Is <500ms.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
Dimensions
Dimensions  (Unit: Mm)
Ultrasonic sensors CSB30 series Dimensions
Reference Curve
DADISICK Ultrasonic sensors CSB30 series Reference Curve
Ultrasonic sensors CSB30 series data sheet
Ultrasonic sensors CSB30 series operation instructions

recommend