For ReeR Vision Series 500 mm, 400 mm, 300 mm Resolution 8 m Sensing Distance 500 mm to 900 mm Protective Height MXL Safety Light Curtain Replacement
- Model
- Vision Series | MXL 2B, MXL 3B, MXL 4B
Item specifics
- Series
- Vision Series
- Resolution:
- 500 mm, 400 mm, 300 mm
- Scanning range:
- 8 m
- Protective field height:
- 500 - 900 mm
- 2 Safety outputs (OSSD):
- 2 PNP
- Response time:
- 4 - 5.5 ms
- Connection type:
- M12
- Security level:
- PLe4
Review
Description
For ReeR Vision Series 500 mm, 400 mm, 300 mm Resolution 8 m Sensing Distance 500 mm to 900 mm Protective Height MXL Safety Light Curtain Replacement Parameter
Brand | From network | DADISICK |
|
|
Models
|
MXL 2B | QCE04-200-600 2BB |
|
MXL 3B |
QCE06-200-1000 2BB | ||
MXL 4B | QCE06-200-1000 2BB | ||
Beam spacing | 500 mm, 400 mm, 300 mm | 600 mm, 1000 mm | |
Protected altitude | 500 mm, 800 mm, 900 mm | 600 mm, 1000 mm, 1000 mm | |
Scanning range | 8 m | 0.3 - 6 m | |
Response time | 4 ms - 5.5 ms | ≤15 ms | |
Output method | 2 PNP | 2 PNP | |
Reliability and durability | IP65 | IP65 | |
Connector | M12 | M12 | |
Housing cross-section | 45 mm x 35 mm | 30 mm x 30 mm | |
Safety Certificate | CE, TÜV, cULus,RoHS,UKCA | TÜV, UL, CE, RoHS, GB | |
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | |||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand ReeR's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
FAQ
Q: How to determine the height of a safety light curtain?
A:
The height position of a safety light curtain refers to the position of the light curtain relative to the upper and lower die openings on the machine. Under the premise of ensuring a safe distance, the lowest beam of the safety light curtain must not be higher than the lower edge of the die opening, and the highest beam must not be lower than the upper edge of the die opening.
The protective height of a safety light curtain refers to the distance between the uppermost and lowermost beams of the light curtain, which represents the effective height of the light curtain. The protective height is equal to the stroke of the machine slide plus the adjustment amount. The size of the protective height is related to the number of safety light curtain beams. If the number of beams is too few, the light curtain height may not fully cover the hazardous area, potentially leading to accidents. On the other hand, if the protective height is too large, it can result in unnecessary expenses and inconvenience in usage. Therefore, selecting the appropriate specifications (number of beams) for the safety light curtain based on the protective height is crucial.
The safety distance of a safety light curtain refers to the shortest distance between the light curtain and the dangerous area of the working mold edge, which is the distance required for the slide to stop from the position where the hand obscures the light curtain to reach the danger boundary. The safety distance is one of the necessary conditions to ensure the protective function of the safety light curtain and must be calculated correctly! The calculation method should be determined based on the braking method of the press.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
