For Panasonic SF4C Series 10 mm Resolution 3 m Sensing Distance 400 mm to 640 mm Protective Height Ultra-thin Safety Light Curtain Replacement
- Model
- SF4C Series | SF4C-F39-J05, SF4C-F47-J05, SF4C-F55-J05, SF4C-F63-J05
Item specifics
- Series:
- SF4C Series
- Resolution:
- 10 mm
- Scanning range:
- 0.1 - 3 m
- Protective field height:
- 150 mm - 1350 mm
- 2 Safety outputs (OSSD):
- 2 PNP
- Response time:
- 9 ms
- Connection type:
- M12
- security level:
- PLe4
Review
Description
For Panasonic SF4C Series 10 mm Resolution 3 m Sensing Distance 400 mm to 640 mm Ultra-thin Safety Light Curtain Replacement Parameter
Brand | From network | DADISICK |
|
|
Models
|
SF4C-F39-J05 | QM40-10-390 2BA |
|
SF4C-F47-J05 |
QM48-10-470 2BA | ||
SF4C-F55-J05 | QM56-10-550 2BA |
||
SF4C-F63-J05 | QM64-10-630 2BA | ||
Beam spacing | 10 mm | 10 mm | |
Protected altitude | 400 mm, 480 mm, 560 mm, 640 mm | 390 mm, 470 mm, 550 mm, 630 mm | |
Scanning range | 0.1 - 3 m | 0.3 - 3 m | |
Response time | 9 ms | ≤15 ms | |
Output method | 2 PNP | 2 NPN | |
Reliability and durability | IP65 | IP65 | |
Connector | M12 | M12 | |
Housing cross-section | 30 mm x 13.2 mm | 36 mm x 36 mm | |
Safety Certificate | TÜV, CE, ＵL, UKCA , CSA | TÜV, UL, CE, RoHS, GB | |
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | |||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand Panasonic's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
FAQ
Q: What is an electromagnetic security door lock switch? ensure that the it not opened ？
A：
Electromagnetic security door lock switch: As the name suggests, when power is applied, the lock generates magnetic force, causing the lock to engage and latch onto a small metal piece within the groove. When the power is turned off, the latch will reset and the lock opens as the magnetic force disappears. It also has the feature of unlocking when power is applied, and can control 6 pairs of contacts simultaneously, providing multiple mechanical signal outputs in either normally open or normally closed state. It can control more than 3 devices and can be used in conjunction with safety relays and contactors, offering powerful functionality.
To ensure that the electromagnetic security door lock switch is not opened after a power failure, you can consider the following measures:
The magnetic lock operates based on electromagnetic principles and does not have any mechanical structure. In recent years, magnetic locks have been widely used in automated production lines. Since they are part of an access control system, they require a power supply, usually a 12V DC power source. To ensure that the door lock is not opened during a power outage, the access control power supply box should be equipped with a backup battery (backup power supply).
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
