For Panasonic SF4C Series 10 mm Resolution 3 m Sensing Distance 160 mm to 320 mm Protective Height Ultra-thin Safety Light Curtain Replacement
- Model
- SF4C Series | SF4C-F15-J05, SF4C-F23-J05, SF4C-F31-J05
Item specifics
- Series:
- SF4C Series
- Resolution:
- 10 mm
- Scanning range:
- 0.1 - 3 m
- Protective field height:
- 160 mm - 640 mm
- 2 Safety outputs (OSSD):
- 2 PNP
- Response time:
- 9 ms
- Connection type:
- M12
- Security level:
- PL e4
Review
Description
For Panasonic SF4C Series 10 mm Resolution 3 m Sensing Distance 160 mm to 320 mm Ultra-thin Safety Light Curtain Replacement Parameter
Brand | From network | DADISICK |
|
Models
|
SF4C-F15-J05 | QZ16-10-150 BA |
|
SF4C-F23-J05 |
QZ24-10-230 BA | ||
SF4C-F31-J05 | QZ32-10-310 BA |
||
Beam spacing | 10 mm | 10 mm | |
Protected altitude | 160 mm, 240 mm, 320 mm | 150 mm, 230 mm, 310 mm | |
Scanning range | 0.1 - 3 m | 0.3 - 3 m | |
Response time | 9 ms | ≤15 ms | |
Output method | 2 PNP | 2 NPN | |
Reliability and durability | IP65, IP67 | IP65 | |
Connector | M12 | M12 | |
Housing cross-section | 30 mm x 13.2 mm | 17.2 mm x 30 mm | |
Safety Certificate | UL, CSA, CE TÜV, UKCA | CE TÜV, UL, RoHS, GB/T, CE TYPE 4 | |
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. |
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand Panasonic's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
FAQ
Q: What is a safety mat?Technical specifications of industrial safety mats.
A:
DADISICK safety mats are devices used for floor protection in hazardous areas. They generate a switch signal by detecting sufficient pressure, ensuring area safety. They are reliable, easy to install, and versatile. The safety mats have excellent corrosion resistance to various chemicals such as acids, alkalis, and salts, and are expected to work for more than one million cycles. They are made of special heavy-duty PVC plastic and impact-resistant steel plate structures, preventing delamination and withstanding high-temperature welding slag and wheel rolling. The dynamic load capacity reaches 800-1000Kg. DADISICK safety mats are available in sizes ranging from 300X300mm to 1500X1000mm, and can be customized according to customer protection requirements. They come with two types of safety mat edges: aluminum alloy or yellow PVC edges, installed on an aluminum baseplate with pre-set cable channels.
Safety mat switches are gradually being introduced into various types of production-oriented enterprises and are widely utilized in these businesses.
Introduction to DADISICK Safety Mats:
Model: DT11 DT15
Detection Method: Pressure sensing method
Operating Force: <20KG
Maximum Allowed Dynamic Load: <200kg/cm² Impact Load:<800KG/cm²
Mechanical Life: >3000000 times >3000000 times
Encapsulation and Surface Protective Layer: PVC PVC, CR
Ambient Temperature: -20℃——+55℃ -35℃——+65℃
Protection Level: IP65
Maximum Temperature (23 degrees): 95% (condensation)
Response Time: 13ms
EN1760-1 Reset Command: Supported
ISO 13849-1:2006 Cat.3
Average Dangerous Failure Time: >30 years
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.