For ABB Orion1 Series 30 mm Resolution 20 m Sensing Distance 1500 mm to 1800 mm Protective Height Extended Light Curtain Replacement
- Model
- Orion1 Series | Orion1-4-30-150-E, Orion1-4-30-165-E, Orion1-4-30-180-E
Item specifics
- Series:
- Orion1 Series
- Resolution:
- 30 mm
- Scanning range:
- 0.2 - 20 m
- Protective field height:
- 1500 - 1800 mm
- 2 Safety outputs (OSSD):
- 2 PNP
- Response time:
- 20 - 22 ms
- Connection type:
- M12
- security level:
- PLe4
Review
Description
For ABB Orion1 Series 30 mm Resolution 20 m Sensing Distance 1500 mm to 1800 mm Protective Height Extended Light Curtain Replacement Parameter
Brand | From network | DADISICK |
|
|
Models
|
Orion1-4-30-150-E | QMT76-20-1500 2BE |
|
Orion1-4-30-165-E |
QMT84-20-1660 2BE | ||
Orion1-4-30-180-E | QMT90-20-1780 2BE |
||
Beam spacing | 30 mm | 20 mm | |
Protected altitude | 1500 mm, 1650 mm, 1800 mm | 1500 mm, 1660 mm, 1780 mm | |
Scanning range | 0.2 - 20 m | 0.3 - 6 m | |
Response time | 20 ms - 22 ms | ≤15 ms | |
Output method | 2 PNP | 2 PNP | |
Reliability and durability | IP65 | IP65 | |
Connector | M12 | M16 | |
Housing cross-section | 35 mm x 40.75 mm | 51 mm x 35 mm | |
Safety Certificate | TÜV, EC, ＵL | TÜV, UL, CE, RoHS, GB | |
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | |||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand ABB's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
FAQ
Q: How to troubleshoot unstable safety light curtains?
A：
Safety light curtains are widely used in various industries to ensure safety in production processes. During this process, it is crucial to perform regular analysis, inspection, and maintenance of safety light curtains to ensure their effective use. In the case of encountering unstable factors, here's what you can do to troubleshoot:
Factors causing instability in safety light curtains and their corresponding solutions:
1. Electromagnetic interference: Ensure proper grounding and separate the signal lines from the power lines of the light curtain.
2. Unstable power supply: Replace with a dedicated and stable power supply.
3. Interference from sunlight, lasers, or arcs: Choose Epson's light curtains with anti-sunlight capabilities.
4. Lens obstructed by dust: Clean the lens to remove dust and restore proper light reception.
5. Instability due to vibration: Realign the light curtain and use vibration-resistant brackets.
6. Insufficient distance between transmitter and receiver: If the actual required distance exceeds the light curtain's maximum range, replace it with a light curtain that has a longer range.
7. Sufficient distance but misalignment causing insufficient light reception: Readjust the angle of the light curtain for proper alignment.
8. Normal operation during the day but instability at night: Insufficient light reception; choose a light curtain with a larger detection range.
9. Interference between adjacent light curtains: Rearrange the positions of the transmitters and receivers or consider using Dadi's anti-interference safety light curtains.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
