For Banner EZ-SCREEN LP Series 25mm Resolution 270mm to 830mm Protective Height Safety Light Beam Replacement
- Model
- EZ-SCREEN LP Series | SLPP25-270, SLPP25-270P88, SLPP25-270AP88, SLPCP25-410, SLPCP25-410AP88, SLPCP25-410P88, SLPMP25-410, SLPP25-410, SLPP25-410AP88, SLPP25-410P88, SLPCP25-550, SLPCP25-550P88, SLPMP25-550P128, SLPP25-550, SLPP25-550P88, SLPCP25-690, SLPCP25-690P88, SLPMP25-690, SLPMP25-690P128, SLPP25-690, SLPP25-690A, SLPP25-690AP88, SLPP25-690P88, SLPCP25-830, SLPCP25-830P88, SLPMP25-830P128, SLPP25-830, SLPP25-830N, SLPP25-830P88
Item specifics
- Series
- LP Series
- Resolution:
- 25mm
- Scanning range:
- 0.1-7m
- Protective field height:
- 270-830mm
- 2 Safety outputs (OSSD):
- 2 PNP
- Response time:
- 8-14ms
- Connection type:
- M12
- Security level:
- UL, CE, PLe4
Review
Description
For Banner EZ-SCREEN LP Series 25mm Resolution 270mm to 830mm Protective Height Safety Light Beam Replacement Parameter
Brand | From network | DADISICK |
|
Models | SLPP25-270 | ||
SLPP25-270P88 | |||
SLPP25-270AP88 | |||
SLPCP25-410 | |||
SLPCP25-410AP88 | |||
SLPCP25-410P88 | |||
SLPMP25-410 | |||
SLPP25-410 | |||
SLPP25-410AP88 | |||
SLPP25-410P88 | |||
SLPCP25-550 | |||
SLPCP25-550P88 | |||
SLPMP25-550P128 | |||
SLPP25-550 | |||
SLPP25-550P88 | |||
SLPCP25-690 | |||
SLPCP25-690P88 | |||
SLPMP25-690 | |||
SLPMP25-690P128 | |||
SLPP25-690 | |||
SLPP25-690A | |||
SLPP25-690AP88 | |||
SLPP25-690P88 | |||
SLPCP25-830 | |||
SLPCP25-830P88 | |||
SLPMP25-830P128 | |||
SLPP25-830 |
|||
SLPP25-830N | |||
SLPP25-830P88 | |||
Beam spacing | 25mm | 20mm | |
Protected altitude | 270mm/410mm/550mm/690mm/830mm | 260mm/420mm/540mm/700mm/820mm | |
Scanning range | 0.1-7 m | 0.3-10m | |
Response time | 8-14ms | ≤15ms | |
Output method | 2 PNP | 2 PNP | |
Reliability and durability | IP65 | IP65 | |
Connector | M12 | M16 | |
Housing cross-section | 28 x 26mm | 51 x 35mm | |
Safety Certificate | UL, CE, PLe4 | TÜV, UL, CE, RoHS, GB | |
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand Banner's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
Model：
QT14/20-260 2BC, QT22/20-420 2BC, QT28/20-540 2BC, QT36/20-700 2BC, QT42/20-820 2BC
FAQ
Common Misconception of Selecting Light Curtain Resolution
Quantifying the resolution of safety light curtains
In various types of safety light curtain products on the market, an important selection parameter is the resolution. The resolution is typically quantified in millimeters (mm), such as common values like 14mm, 20mm, 30mm, and so on. These quantified indicators represent the gap between the sensing functions of the safety light curtain sensors.
Is it an intuitive classification or a misconception?
According to different resolutions, safety light curtains are usually classified as finger, hand, and body protection types, which are used to indicate the most suitable application scenarios. However, this intuitive classification method is often misunderstood. Many designers believe that they can directly select the type of light curtain based on the body parts that the hazard source can injure. However, such a matching method often does not meet the requirements of standards
The correct selection method for safety light curtains.
According to the European standard EN ISO 13855, the minimum distance of safety light curtains from the hazard source should be calculated by taking parameters such as the resolution of the light curtain, installation method, and system's stopping response time into consideration. Different formulas apply for vertical, horizontal, and angled installations. Only by considering the resolution of the light curtain, positioning method, stopping response time, and distance from the hazard source in a comprehensive manner can we adhere to the standard and choose the correct method.
For example, if the light curtain selection for a certain device is based on a matching method and a hand protection type is chosen. However, if the positioning of the light curtain in relation to the hazard source is restricted or if the system's stopping response time is too long, it is necessary to consider increasing the resolution of the light curtain to meet the requirements of EN ISO 13855.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
